Industrial Process Timers, Stopwatches,
Pulse Width Meters, Duty Cycle Meters
Product Selection Guide

Laureate Stopwatch Meter Configured to time single events or processes which produce start and stop pulses. Duration can be from less than 1 µs to 999,999 hours. Timing resolution to 0.2 µs. Time may be displayed in HH.MM.SS clock format to 99.59.59 with 1 s resolution or in decimal H, M or S format with six-digit resolution. Multiple events can also be accumulated to 999,999 hours. Optional data I/O and relays for alarm or control. Six 0.56" (14.2 mm) high digits, 1/8 DIN case.
Laureate Time Interval Meter Configured to time periodic events which produce start and stop pulses from 1 µs to 199.99 s over a programmed gate time up to 199.99 s. Timing resolution to 0.2 µs. Optional data I/O and relays for alarm or control. Six 0.56" (14.2 mm) high digits, 1/8 DIN case.
Laureate Duty Cycle Meter Configured display ON or OFF period as a percentage of total period over a gate time from 10 ms to 199.99 s. A resolution of 1%, 0.1% or 0.01% is selectable. Ideal for repetitive short pulses with a pulse width down to less than 1 µs.
MAGNA Series Large Digit Clocks & Elapsed Timers 4-digit model (MM:SS or HH:MM) or 6-digit model (HH:MM:SS) with a digit height of 2.2" (57 mm), 4" (102 mm), 6" (150 mm), or 8" (200 mm) for long viewing distances. Optional dual 5A relays, analog output, and serial output. Choice of display brightness and cases for indoor or outdoor mounting.


Stopwatch Mode for single events	Time Interval Mode for Time Delay	Time Interval Mode for Pulse Width

Laureate process timers are available as stopwatches, which time single events, as time interval meters, which time periodic events, and as duty cycle meters, which display average ON or OFF period as a percent of total period. Time can be displayed decimal hours, minutes or seconds, or in HH.MM.SS clock mode.